Mogelijk langere levertijd op dit item, informeer naar beschikbaarheid
CXL3 Cable Avoidance Tool
- On/Off Switch: Spring loaded trigger switch under handle
- Function Select Switch (Three position): P – Power Mode; R – Radio Mode; G – Generator Mode
- Sensitivity Control
Removable and user replaceable loudspeaker module
Multi-segment Liquid Crystal Display indicating:
- Signal Strength
- Mode selected
- Battery Condition
Case moulded from high impact plastic. Designed to withstand 1m (3’3”) drop onto a hard surface
Weight (including batteries)
2.9kg (6 pounds 6 ounces)
720mm x 270mm x 63mm (28.3” x 10.6” x 2.4”)
- Locate Accuracy: better than 10% of depth
Internal 8 x ‘AA’ (LR6) cells (either alkaline non-rechargeable or NiMH rechargeable)
40 hours intermittent use at 20ºC (68ºF) using alkaline cells
Performance figures stated can be affected by site parameters such as ground conditions, temperature, and strong electromagnetic fields. Specification may be subject to change. All C.Scope Locators are in compliance with the essential requirements and other relevant provisions of Council Directive 2014/30/EU. Compliance has been demonstrated by testing representative samples to the relevant harmonised standards. All C.Scope Locators comply with the RoHS directive, 2011/65/EU.
|Liquid Crystal Display||•|
|Periodic Calibration Required*||•|
|Three Year Warranty**||•|
|Batteries*** 8 x AA (LR6) Alkaline or NiMH Rechargeable||•|
* Periodic Calibration. The CXL3 Cable Avoidance Tool requires periodic calibration.
** Three Year Warranty. Conditions apply.
*** Batteries. The CXL3 Cable Avoidance Tool uses 8 x AA LR6 Alkaline or NiMH Rechargeable batteries sealed in a secure, fitted battery compartment. The battery pack will typically provide approximately 40 hours of service depending on use. The battery compartment also houses a spare battery holder.